- Fire extinguishers
- Powder fire extinguishers
- Carbon Dioxide fire extinguishers /CO2/
- Water fire extinguishers
- Foam fire extinguishers
- Fire extinguishers for wood fires
- Spare parts for extinguishers
- Machines for charging fire extinguishers
- Fire Fighting Equipment
- Fire extinguishing systems
- Fire gas extiguishing systems
- Sprinkler systems
- Aerosol extinguishing systems
- Fire alarm systems
- Fire resistant doors
- Fire protective clothing
- Fire foam concentrates
- Smoke vents
- Active smoke curtains
- Fixed smoke curtains
- Fire curtains
- Cylinders for technical gases
- Extinguishing agents
- Gas Detection Systems
- Fire prevention systems
- Fire protection of metal and wooden constructions
- Emergency lighting
- Safety signs
- First Aid Kits, Safety Car Kits, Warning triangles, Safety vests
CO2 fire extinguisher - 2 kg. - "TORNADO"
Charged, fully equipped (valve, hose and horn), with CE marking, EN3(Outside diameter): f 105 mm
(Volume): 2.67 l
(Cylinder length): 440 mm
(Weight of the cylinder): 3.8 kg.
(Weight of the fire extinguisher): 6.6 kg.
(Contents of the CO2 in the extinguisher): 2 kg.
(Temperature range): -30C + 60C
(Maximum working pressure): 216 bar
(Test Pressure): 315 bar
(Minimum thickness of the cylinder): 2.51 mm
(Material): 34CrMo4
(Fire class): 34B
(Package size):16 x 13 x 56 cm
PURPOSE
Fire extinguishers are designed for fire ignition or initial fire of solid material which are easy flammable and combustible liquids, gaseous substances and electrical systems under pressure up to 1000 V under the technical characteristics of products
SCOPE
Equipment of buildings (residential, public, commercial, manufacturing, agricultural and mass gatherings of people, etc.), facilities, installations, vehicles and other machinery.
GENERAL STRUCTURE AND PRINCIPLE OF OPERATION
All fire extinguishers consist of extinguishing substance, metal cylinder for storing its vent gas valve with safety valve, pressure gauge (for fire extinguishers with module H), with nozzle or hose nozzle (gun) to guide the flow, label form of BDS EMZ, seals and accessories.
Fire extinguishers works on the principle of suppression of fire extinguishing substance to the fire under the impact ejection gas.
INSTRUCTIONS FOR USE
Use of powder, water, foam and CO2 fire extinguishers of type H broke the seal and pull out its preventive pin. Point the hose (nozzle or gun) to the outbreak of the fire and press or rotate (as structure) the valve.
PACKAGE AND STORAGE
Fire extinguishers are packaged in paper or polyethylene packaging and stored in a dry ventilated space, protected from direct hit of sunlight at temperature from +5 C to +30 C.
INSPECTION, REPAIRING AND RECHARGING
All fire extinguishers shall be inspected after each use and periodically not less than once a year. Inspection, repairing and recharging is carried out with spare parts and fire-fighting substance certified by the manufacturer to repair it.
SCRAP OF THE FIRE EXTINGUISHERS
Fire extinguishers, their components and extinguishing substances are discarded when it is impossible to be recovered.
INSTRUCTIONS FOR SAFETY OPERATIONS
Do not extinguish ELECTRICAL systems under high voltage with water and foam fire extinguishers and installations! Electrical installations with voltage to 1000 V extinguish with fire extinguishers and systems with powder and CO2 with the minimum distance of 1 meter.
It is not allowed to use the fire extinguishers if you are not familiar with the safety instructions.